CONTENT
目 录
1 Design basis and conditions 设计依据和条件 2
2 Scope of proposal 项目范围 4
3 Performance guarantees 履约保函 6
4 Description of the plant 工厂描述 7
4.1 Process description 工艺描述 7
4.2 Electricity and automation电气和自动化 11
5 Main equipment List 主机设备清单 16
6 Project Schedule项目过度表 19
7 Site service and technology training 服务与技术培训 20
Annex1 Equipment list of the cement line
附件1：水泥生产线设备清单
Annex2 Process flow sheet
附件2：工艺流程
Annex3 General layout
附件3：总体布局
1. Design basis and conditions
1.1 Locations of the plant:
1.2 Technology way: dry rotate kiln technology
1.3 Production capacity 1000t/d clinker
1.4 Cement variety Ordinary Portland Cement according to
Chinese standard
1.5 Site condition
Plant site condition(工厂条件)
1.5.1 Altitude of the site above sea-level(厂址海拔标高)：60m
1.5.2 Temperature(温度):
Annual average(年平均):
Average of the hottest month: Max. (最热月份平均气温：最高): 48 ℃
Average of the coldest month: Min. (最冷月份平均气温：最低): 8 ℃
1.5.3 Rainfall (降雨量)
Max. (within a hour/day) (最大降雨量：一小时/天): 2 mm
Annual average(年平均): 6 mm
Number of rainy days(降雨天数) ： 80 days
1.5.4 Earthquake factor at site(厂区地震等级): No
1.5.5 Max. wind velocities at site(厂区最大风速): 140m/s
1.6 Characteristics of Raw Materials
| Limestone | CaO | MgO | K2O+Na2O | SO3 | f SiO2 |
| Limestone 1 | >48 | <3 | <0.6 | <1 | <4 |
| Limestone 2 | >45 | <3.5 | <0.8 | <1 | <4 |
1.7 Seismic intensity < Richter scale 7Characteristics
1.8 A plan and flat land is assumed with the soil bearing capacity of 200 kpa/m2
1.9 Wind pressure Pa
1.10 Temperature: yearly average ℃
1.11 Clinker module
The contractor can specify the raw material proportioning for raw meal, The average components of clinker must be in conformity with the requirements of clinker module.:
承包商可以指定生料配料，熟料的平均成分必须符合熟料模块的要求：
Lime saturation value of clinker：KH=0.89±0.01。
熟料的石灰饱和值：KH = 0.89±0.01
Silica modulus： SM=2.6±0.1。
二氧化硅模量：SM = 2.6±0.1
Alumina iron modulus： IM=1.6±0.1。
铝铁模数：IM = 1.6±0.1